Xantrex Automatic Generator Uživatelský manuál Strana 24

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 124
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 23
Installation
2–2 975-0082-01-01
Preparing an Installation
Before you install the Auto Gen Start, you must consider how and where
the unit will be mounted, and plan the connection routes between the
Auto Gen Start, the generator, thermostats and the control panel.
Tools and materials required
Before beginning an installation, you will need the following tools and
materials:
Mounting template (supplied)
Wiring harness (Xantrex part number 809-0917, supplied)
Four #6 screws, 1 1/4 inch (supplied)
#16 or #18 AWG wire (see “Wire size and length” on page 2–7)
Xantrex network cables or equivalent
Network terminators (if required)
Phillips screwdriver
Wire cutters
Wire strippers
Zobrazit stránku 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 123 124

Komentáře k této Příručce

Žádné komentáře